Product overview:

The basic components of this product are phase change paraffin wax and resin, which can absorb, store and release more heat, and have the functions of bidirectional adjustment of ambient temperature, heat storage and contact cold feeling.

Product performance:

Appearance: White or yellowish suspension   

Material: Paraffin/polymer resin

Average particle size: 2-20 μ m          

pH: 6-9

Density: 1.0-1.1 g/cm³               

Viscosity: 1500-5000 cps

Heat resistance temperature: Above 200℃

Application methods:

The product can be used for a variety of fibers, such as natural fibers, synthetic fibers, etc. It can be used by printing process, coating method, padding method and other technological methods.

1. Padding method:

1.1 Suggested dosage of cold finishing agent: 3-5% weight ratio to fabric. If necessary, according to the specific requirements of customers, the dosage can be appropriately increased.

1.2 Recommended process:

Fabric → pad finishing solution (padding  liquid ratio is about 60-70%) → drying ( at 80-120℃)

Tension at high temperature ( at 150-180℃ for 30-60 seconds ) → finished product.

2. Coating method or printing method:

When coating or printing process is adopted, it can be treated with appropriate reference to the above dosage and process.

Precautions:

Pre-test should be carried out before  mass production to confirm the compatibility of various additives.

Packing:

25 kg/barrel; Or pack according to customer requirements.

Storage:

Store in a place away from light, dry and well ventilated;

It is forbidden to store in high temperature, open air or places with fire sources.

All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.