Product overview:

The anti-fungicidal agent JYK ABDO-210 can be used in the mildew-proof processing of various fibers, yarns and textiles, and the mildew-proof effect is obvious. The product is mainly used to avoid mold during the storage of textiles, or for textile products that do not directly contact the skin.

Product character:

The applicable pH range is wide, and the pH value can be used within 2-9;

It is miscible with water, can be added in any process, and is easy to operate;

Low dosage, broad spectrum and effective inhibition of various bacteria, fungi and yeasts.

Product performance:

Appearance: Yellow or yellowish green transparent solution            

pH: 2-5

Viscosity: Less than 100 cps         

Density: 1.2-1.4 g/cm³

Application methods:

The recommended addition amount of JYK ABDO-210 is 0.2-0.5% weight ratio to fabric,according to the breeding situation of mold in fibers, yarns or fabrics;

The product can be used by padding, impregnation, coating and foam.

Test methods:

AATCC-30, ASTM G21-96, JIS Z 2911 and other standards are recommended to test the mildew resistance.

Precautions:

1. Pre-test should be carried out before mass production to confirm the compatibility between various additives;

2. JYK ABDO-210 is a high-concentration product. Protective measures must be worn during operation to avoid direct contact with eyes and skin;

3. The product is forbidden to be used for the treatment of textiles in direct contact with human skin;

4. The product is forbidden to be used in alkaline medium with pH value above 9.0.

Packing:

25 kg/barrel; Or pack according to customer requirements.

Storage:

Store in a place away from light, dry and well ventilated;

It is forbidden to store in high temperature, open air or places with fire sources.

All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.